This enables you to confirm scanned images page by page while copying them when you scan originals in succession on the platen glass. This is useful to prevent miscopying resulting from misscanning.
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."
When 1-Sided
 2-Sided is set, two-sided copying is not performed and the machine copies each original at a time.The originals must be set on the platen glass. You cannot copy using Print & Check mode with the originals set in the feeder.
|
1.
Place your originals on the platen glass → press [Options] → [Print & Check].
2.
Press 
.
.|
NOTE
|
|
To cancel scanning, press [Stop] or press
 . |
3.
Confirm the contents of the printout → scan the next original.
To rescan the image immediately after an original has scanned, replace the original → select [Re-Scan] → press .
.If you want to change the copy settings, make the changes before pressing .
.You can adjust the exposure and the image quality. (See "Exposure and Original Type Settings.")
You can change the number of copy sets. (See "Flow of Copy Operations.")
You can change the copy ratio. (See "Preset Zoom," "Zoom by Percentage," "Auto Zoom," "Fit to Page," "Reducing/Enlarging Using the Original and Copy Sizes," and "Setting the X and Y Axes Independently.")
4.
After all originals are scanned, press [Start Copying].