You can reduce or enlarge originals by any copy ratio in 1% increments. The available copy ratios are from 25% to 400% when the original is placed on the platen glass, and from 25% to 200% when the original is placed in the feeder. The same copy ratio is used for the horizontal (X) and vertical (Y) axes.
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."
|
|
NOTE
|
|
To set the copy (zoom) ratio to 100%, press [1:1(100%)].
|
1.
Place your originals → press [Copy Ratio].
2.
Press [-] or [+] to set a copy ratio → press [OK]. You can also use the numeric keys to enter values.
3.
Press 
.
.