» Print » Setting the Machine (PS/PCL/UFR II Printer) » Overview of Printer Settings
|
Overview of Printer Settings
The following table lists all settings of the Printer Settings menu.
Printer Menu
Item
Settings
ON, OFF*
PCL5e, PCL5c, PCL6, PS3, FAX, UFRII
Settings Menu
Item
Settings
1 to 9999; 1*
On, Off*
Paper Feed
Letter, Legal, A4*, B5, A3, B4, A5, 11x17, Executive, Statement
Thin, Plain*, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Letterhead, Tracing, Transparency, Labels, Bond, Tab, Pre-punched
On, Off*
Paper Output
Off* Collate, Rotate+Collate, Rotate+Group, Offset+Collate, Offset+Group, Staple+Collate, Staple+Group
Copies to Offset (Offset+Collate): 1 to 9999; 1*
Staple Position (Staple+Collate):
Corner (Upper-L), Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), Double (Left)
Staple Position (Staple+Group):
Grp Upp L-Corner, Grp Double(Top), Grp Upp R-Corner, Grp Double(R), Grp Lwr R-Corner, Grp Double(Btm), Grp Lwr L-Corner, Grp Double(L)
Off*, Top, Bottom, Left, Right
Off*, Z-Fold, C-Fold
Face Down*, Face Up
Print Quality
On*, Off
1 to 9; 5*
On, Off*
On, Off*
Off, Level 1*, Level 2, Level 3, Level 4
Off*, Level 1, Level 2, Level 3, Level 4
1200 dpi, 600 dpi*
Layout
Long Edge*, Short Edge
-50.0 to +50.0 mm; 0.0* mm
-50.0 to +50.0 mm; 0.0* mm
-50.0 to +50.0 mm; 0.0* mm
On, Off*
1 hour*, 2 hours, 3 hours, 6 hours, 12 hours, 24 hours
Timeout (5 to 300 seconds), Off; 15* seconds
On, Off*
On, Off*
On, Off*
Off*, Auto, Correction Width (0.000 to 10.00 mm)
On, Off*
Off*, Blank, Printed
Copy Set Numbering*4
On, Off*
5 Locations*, Top Left, Bottom Left, Top Right, Bottom Right, Full Surface
1 to 9999; 1*
Small(12 point), Medium(24 point), Large(36 point)*
1 to 5; 3*
-8 to +8 mm; 0* mm
Auto*, PS, PCL, Imaging, PDF
None*, PS, PCL, PDF
An asterisk (*) indicates the default setting.
*1 Indicates a menu that appears only when 'Toner Save' is set to [Off].
*2 Indicates menus that appear only when 'Booklet' is set to [On].
*3 Indicates a menu that appears only when 'Copy Set Numbering' is set to [Off].
*4 Indicates a menu that appears only when 'Transparency Interleaving' is set to [Off].
*5 Settings are not applicable for the UFR II mode.
UFR II Settings
Item
Settings
Text:
Tone, Gradation, Resolution*, High Resolution
Graphics:
Tone*, Gradation, Resolution, High Resolution
Image:
Tone*, Gradation, Resolution, High Resolution
On*, Off
An asterisk (*) indicates the default setting.
PCL Settings (PCL or PS Printer only)
Item
Settings
On, Off*
Portrait*, Landscape
0 to 104; 0*
4.00 to 999.75 point; 12.00* point
0.44 to 99.99 cpi; 10.00* cpi
5 to 128 lines; 64* lines
ARABIC8, DESKTOP, GREEK8, HEBREW7, HEBREW8, ISO4, ISO6, ISO11, ISO15, ISO17, ISO21, ISO60, ISO69, ISOCYR, ISOGRK, ISOHEB, ISOL1, ISOL2, ISOL5, ISOL6, LEGAL, MATH8, MCTEXT, MSPUBL, PC775, PC8*, PC850, PC851, PC852, PC862, PC864, PC866, PC8DN, PC8GRK, PC8TK, PC1004, PIFONT, PSMATH, PSTEXT, ROMAN8, VNINTL, VNMATH, VNUS, WIN30, WINARB, WINBALT, WINCYR, WINGRK, WINL1, WINL2, WINL5
On, Off*
Millimetres*, Inches
148.9 to 630 mm; 487.7* mm
100.0 to 297.0 mm; 297.0* mm
Yes, No*
On, Off*
Text:
Tone, Gradation, Resolution*, High Resolution
Graphics:
Tone*, Gradation, Resolution, High Resolution
Image:
Tone*, Gradation, Resolution, High Resolution
An asterisk (*) indicates the default setting.
*6 Indicates a menu that appears only if 'Font Number' is specified from '1' to '69'.
*7 Indicates a menu that appears only if 'Font Number' is specified from as '0' or as from '70' to '89'.
PS Settings (PS Printer only)
Item
Settings
0 to 3600 seconds; 0* seconds
On, Off*
Text:
Gradation, Resolution*, High Resolution
Graphics:
Gradation, Resolution*, High Resolution
Image:
Gradation, Resolution*, High Resolution
sRGB, NTSC*, Uniform RGB
-10%, -5%, Standard*, +5%, +10%
An asterisk (*) indicates the default setting.
Imaging Settings*8
Item
Settings
Auto*, Vertical, Horizontal
Off*, Auto
Auto*, Center, Top Left
On*, Off
Off*, On
Gradation*, Resolution, High Resolution
sRGB, NTSC*, Uniform RGB
An asterisk (*) indicates the default setting.
*8 Settings are applicable only for the Imaging mode of Direct Print.
PDF Settings (PS Printer or PDF Direct Print Printer only)
Item
Settings
On, Off*
On, Off*
Off*, 2 on 1, 4 on 1, 6 on 1, 8 on 1, 9 on 1, 16 on 1
Off, Auto*
Text:
Gradation, Resolution*, High Resolution
Graphics:
Gradation, Resolution*, High Resolution
Image:
Gradation, Resolution*, High Resolution
sRGB, NTSC*, Uniform RGB
-10%, -5%, Standard*, +5%, +10%
Utility Menu
Item
Settings
*9 Settings are applicable only for the PCL mode.
*10 Settings are applicable only for the PS mode.