Paper Feed - Canon imageRUNNER ADVANCE 6075/6065/6055 e-Manual

Paper Feed

Default Paper Size

Letter, Legal, A4*, B5, A3, B4, A5, 11x17, Executive, Statement

This parameter defines the default paper size used when the paper size cannot be set within the application software, when no paper source is specified.

IMPORTANT
If you are printing from an OS that does not have a printer driver for the machine (MS-DOS, UNIX, etc.), make sure that the paper loaded in the paper drawer matches the paper size specified in this setting. If the paper size specified in this setting is not available, an error message is displayed when the machine tries to print the job and the machine stops. In addition, if a paper source has not been selected through the application, the machine automatically selects the default print settings for the paper size and type. (See "Setting the Paper Drawer Auto Selection On/Off.")

IMPORTANT

If you are printing from an OS that does not have a printer driver for the machine (MS-DOS, UNIX, etc.), make sure that the paper loaded in the paper drawer matches the paper size specified in this setting. If the paper size specified in this setting is not available, an error message is displayed when the machine tries to print the job and the machine stops. In addition, if a paper source has not been selected through the application, the machine automatically selects the default print settings for the paper size and type. (See "Setting the Paper Drawer Auto Selection On/Off.")

Default Paper Type

Thin, Plain*, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Letterhead, Tracing,
Transparency, Labels, Bond, Tab, Pre-punched

This parameter sets the default paper type to be used for print jobs. This machine has internally defined optimal print modes for each specified paper type.

IMPORTANT
If you are printing from an OS that does not have a printer driver for the machine (MS-DOS, UNIX, etc.), make sure that the paper loaded in the paper drawer matches the paper type specified in this setting. If the paper type specified in this setting is not available, an error message is displayed when the machine tries to print the job, and the machine stops. In addition, if a paper source has not been selected through the application, the machine automatically selects the default print settings for the paper type and size. (See "Setting the Paper Drawer Auto Selection On/Off.")

IMPORTANT

If you are printing from an OS that does not have a printer driver for the machine (MS-DOS, UNIX, etc.), make sure that the paper loaded in the paper drawer matches the paper type specified in this setting. If the paper type specified in this setting is not available, an error message is displayed when the machine tries to print the job, and the machine stops. In addition, if a paper source has not been selected through the application, the machine automatically selects the default print settings for the paper type and size. (See "Setting the Paper Drawer Auto Selection On/Off.")

NOTE
Use the following figures as a guideline to decide whether paper should be specified as Plain or Heavy. Plain: 64 g/m2 to 90 g/m2 Heavy: 91 g/m2 to 256 g/m2 Canon transparency film is recommended for printing on transparencies. Canon label paper is recommended for printing on labels. Thin, Plain, Recycled, Colour, Heavy, Letterhead, Bond, and Pre-punched can be printed using two-sided printing.

NOTE

Use the following figures as a guideline to decide whether paper should be specified as Plain or Heavy.

Plain: 64 g/m2 to 90 g/m2

Heavy: 91 g/m2 to 256 g/m2

Canon transparency film is recommended for printing on transparencies.

Canon label paper is recommended for printing on labels.

Thin, Plain, Recycled, Colour, Heavy, Letterhead, Bond, and Pre-punched can be printed using two-sided printing.

Paper Size Override

On, Off*

If paper of the size that is set in the printer driver has not been loaded in the paper drawer, the paper that is printed is changed to the following sizes.

Printer Driver Setting	Paper
LTR	A4
A4	LTR
11" x 17"	A3
A3	11" x 17"

If [On] is selected, the paper size is changed. If there is no paper in the paper source of the size that is set in the printer driver, the paper supply message is displayed and the paper size is not changed.

If [Off] is selected, the paper supply message is displayed and the paper size is not changed.