Transparency Interleaving - Canon imageRUNNER ADVANCE 6075/6065/6055 e-Manual

Transparency Interleaving

Off*, Blank, Printed

If you are printing on transparencies, you can use this setting to output a sheet of paper after each transparency. The paper can be blank, or it can be a paper copy of the transparency.

If [Off] is selected, no sheets are interleaved with the transparencies.

If [Blank] is selected, a blank sheet of paper is inserted between each transparency.

If [Printed] is selected, a printed paper from the print job is inserted between each transparency.

NOTE
This function is not available if 'Copy Set Numbering' is set to [On]. When printing multiple copies, the [Offset+Group] for the 'Finishing' option cannot be used. If the 'Finishing' settings are specified as [Rotate+Group], [Offset+Group], and [Staple+Group], then [Rotate+Collate], [Offset+Collate], and [Staple+Collate] are specified. If [Printed] is selected, the paper printouts are included in the Prints count. However, if [Blank] is selected, they are not included in the Prints count.

NOTE

This function is not available if 'Copy Set Numbering' is set to [On].

When printing multiple copies, the [Offset+Group] for the 'Finishing' option cannot be used.

If the 'Finishing' settings are specified as [Rotate+Group], [Offset+Group], and [Staple+Group], then [Rotate+Collate], [Offset+Collate], and [Staple+Collate] are specified.

If [Printed] is selected, the paper printouts are included in the Prints count. However, if [Blank] is selected, they are not included in the Prints count.