» Status Monitor/Cancel » Checking the Status of Consumables
|
Checking the Status of Consumables
This section describes how to check the status of consumables.
1.
Press → [Consumables].
To check the details of paper loaded in the machine:
Select the paper source you want to check → press [Details].
You can press [] to enlarge the displayed list.
Check the detailed information → press [OK].
The display returns to the Consumable screen.
To check other information:
Check the amount of memory (%) and the remaining amount of toner and staples.
NOTE
The table below indicates the remaining amount of consumables.
Display
Remaining amount of toner
OK
100 to 11%
Low
10 to 1%
Empty
0%
Display
Remaining amount of staples
Remaining amount of Saddle Stitching
OK
100 to 26%
Low
25 to 1%
Empty
0%
To register/set the paper type:
Press [].
Select an item to register/set.
Select the paper source → set the paper type.
NOTE
For information on Paper Settings and Paper Type Management Settings, see "Registering the Paper Type for the Paper Source" and "Registering/Editing Custom Paper Types."
Back to Top