You can assign a name and register/edit up to five custom paper sizes.
This is useful if you often load the same paper size and type into the paper drawers, multi-purpose tray, or document insertion unit.
|
NOTE
|
|
If you select a size key that already has settings stored in it, the settings are displayed.
If you make a mistake when entering values, press
 on the touch panel display → enter the correct values.You can also name keys with no settings stored in them.
For instructions on entering characters, see "Entering Characters from the Touch Panel Display" and "Entering Characters Using a USB Keyboard."
If you press [OK] without entering any characters, the key name reverts to its current name (default S1 to S5).
The paper size settings stored in memory are not deleted, even if you turn OFF the machine's power.
|
1.
Press 
→ [Preferences] → [Paper Settings] → [Register Custom Size].
→ [Preferences] → [Paper Settings] → [Register Custom Size].2.
Select the desired setting.
Select a Size key ([S1] to [S5]) to register or edit a custom paper size → press [Register/Edit].
Enter the custom paper size using the numeric keys on the touch panel display.
Press [X] → enter a value.
Press [Y] → enter a value.
Press [OK].
Select a Size key ([S1] to [S5]) to name → press [Rename].
|
IMPORTANT
|
|
Make sure to check the settings first before deleting them.
|
Enter a name → press [OK].
Select the size key containing the custom paper size settings that you want to delete → press [Delete].
Press [Yes].