You can print information about installed MEAP applications.
If the MEAP application is used by accessing this machine via Web browser, you can set whether to use the SSL communication.
1.
Press 
→ [Management Settings] → [License/Other] → [MEAP Settings] → [SSL Settings].
→ [Management Settings] → [License/Other] → [MEAP Settings] → [SSL Settings].2.
Select [On] or [Off].
|
[On]:
|
SSL is used to communicate.
|
|
[Off]:
|
SSL is not used to communicate.
|
3.
Press [OK].
|
NOTE
|
|
Before setting <Use SSL> to ‘On’, it is necessary to set a default key in Preferences (from the Settings/Registration screen). (See "Changing the Key Pair Used With SSL Encrypted Communications.")
Any changes made to <Use SSL> are also applied to <Use SSL> in [Remote UI] in Management Settings (from the Settings/Registration screen). (See "Setting Remote UI.")
The Use SSL mode is enabled only after you restart the machine (the main power switch is turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power."
|
You can print the MEAP application information, as well as certain system application information.
|
NOTE
|
|
The information is printed as a report.
|
1.
Press → [Management Settings] → [License/Other] → [MEAP Settings] → [Print System Information].
→ [Management Settings] → [License/Other] → [MEAP Settings] → [Print System Information].2.
Press [Yes].
Items printed for all application are as follows:
|
MEAP Function ID:
|
Prints the ID that corresponds with MEAP.
|
|
MEAP Specifications:
|
Prints the version that corresponds with MEAP.
|
|
MEAP Contents:
|
Prints the version of the MEAP contents.
|
Items printed for each application are as follows:
|
Application Name:
|
Prints the name of the application.
|
|
Application ID/System Application Name:
|
Prints the system application's file name or the Application ID of a standard application.
|
|
Application Version:
|
Prints the application's version number.
|
|
Status:
|
Prints the status of the application.
|
|
Installed:
|
The application has been installed successfully.
|
|
Active:
|
The application is running.
|
|
Stopped:
|
The application is idle.
|
|
Installed on:
|
Prints the date and time the application was installed.
|
|
Vendor:
|
Prints the name of the application vendor.
|
|
License Status:
|
Prints the license status.
|
|
Installed:
|
An effective license has been installed.
|
|
Invalid:
|
The license is invalid.
|
|
Overlimit:
|
The installed license has exceeded its user limit.
|
|
Unnecessary:
|
You do not need a license to run the application.
|
|
License Expires After:
|
Prints the expiration date of the license. If License Status shows "Unnecessary" as its value, the expiration date is not printed.
|
|
License Upper Limit:
|
Prints the upper license limit for each counter. If License Status shows "Unnecessary" as its value, the upper license limit is not printed.
|
|
Counter Value:
|
Prints the current value for each counter. If License Status shows "Unnecessary" as its value, the current counter value is not printed.
|
|
Free Register:
|
Prints the current value for each register. If License Status shows "Unnecessary" as its value, the current value is not printed.
|
|
Maximum Memory Usage:
|
Prints the maximum amount of memory that can be used by each application. The Maximum Memory Usage number is printed in kilobytes (KB).
|
|
Registered Service:
|
Prints the service registered on the MEAP framework from the application. The Registered Service is printed only if there is data that corresponds to it.
|
|
NOTE
|
|
The printed items are subject to change, as we are constantly improving our products.
|