» Scanner » Starting Network ScanGear
|
Starting Network ScanGear
The Network ScanGear driver is started by accessing it from a TWAIN-compliant application (such as Adobe Photoshop, Adobe Acrobat, Microsoft Word/Excel/PowerPoint in Microsoft Office 2000 and later, etc.) as follows.
Important
If you are using Network ScanGear for the first time after installing it, the network scanner to be used must be selected with the ScanGear Tool. For details, see "Selecting the Network Scanner to be Used."
The Network ScanGear driver cannot be started at the same time as the ScanGear Tool. If the ScanGear Tool is running, close it.
Note
The window displayed may differ according to the operating system etc.
1.
Switch the scanner online.
For details, see "Switching the Scanner Online."
2.
Start the application.
3.
In the application, select Network ScanGear as the scanner to be used.
In the application, select the command for scanner selection (for example, "Select Scanner", or "Select Source") → select [Color Network ScanGear] (or [Network ScanGear]) in the dialog box that is displayed.
The Network ScanGear main window appears.
Note
Individual items in this window are explained in the "Network ScanGear Main Window."
See the documentation provided with your application for commands and procedures used to select Network ScanGear and start scanning.
If an error message reading "No scanner is selected for scanning" is displayed without the Color Network ScanGear/Network ScanGear window open select a scanner, referring to "Selecting the Network Scanner to be Used," and reselect Color Network ScanGear or Network ScanGear as the scanner in the application.