on the control panel. To reactivate the machine, press again.The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the machine is not used for a prolonged period of time. You can set the machine to enter the Change Energy Saver Mode by pressing on the control panel. To reactivate the machine, press again.
on the control panel. To reactivate the machine, press again.You can also press the control panel power switch to reactivate the machine.
You can set the energy saving level to -10%, -25%, -50%, or Zero Restore Time.
|
Energy Saving level
|
Recovery Time
|
|
-10%
|
Approximately 20 seconds
|
|
-25%
|
Approximately 25 seconds
|
|
-50%
|
Approximately 30 seconds
|
|
Zero Restore Time
|
Approximately 0 seconds
|
|
IMPORTANT
|
|
After deactivating the Energy Saver mode, the machine's recovery time may vary, depending on the energy saving level setting and the surrounding environment (i.e., temperature, humidity, etc.).
|
1.
Press 
→ [Preferences] → [Timer/Energy Settings] → [Change Energy Saver Mode].
→ [Preferences] → [Timer/Energy Settings] → [Change Energy Saver Mode].2.
Select the desired energy saving level → press [OK].
If you want to be able to copy or print immediately, select [Zero Restore Time] (0%).