This mode enables you to scan originals in such a way that, when printing the scanned data, the output paper can be made into a booklet. Specify the Booklet mode when printing the scanned data. (See "Booklet Mode.")
|
IMPORTANT
|
|
This mode is only available for storing files in the Mail Box.
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."
Make sure to place originals with a vertical (portrait) orientation vertically. If these originals are placed horizontally, the even numbered pages will be printed upside down.
|
1.
Select the desired Mail Box.
2.
Place your originals → press [Scan] → [Options] → [Booklet Scan].
3.
Press [Change] for the original size.
4.
Select the desired original size → press [OK].
|
NOTE
|
|
To select an inch paper size, press [Inch-Size].
[2-Sided Original] cannot be selected if A6R is the selected original size.
|
If the original is two-sided, press [2-Sided Original] → select the type of two-sided original → press [OK].
|
[Book Type]:
|
The front and back sides of the original have the same top-bottom orientation.
|
|
[Calendar Type]:
|
The front and back sides of the original have opposite top-bottom orientations.
|
5.
Press [Change] for the booklet layout size.
6.
Select the desired booklet layout size → press [OK].
|
NOTE
|
|
To select an inch paper size, press [Inch-Size].
|
7.
Press [OK] → [Close].
8.
Press 
.
.