» Status Monitor/Cancel » Checking and Cancelling Store Jobs
|
Checking and Cancelling Store Jobs
From the Job Status Screen (Store)
From the Log Screen (Store)
This section describes how to check the job status, cancel a job, and print the log list from the Store screen.
From the Job Status Screen (Store)
This section describes how to check the Store job status and to cancel a job from the Status screen of the Store job.
Checking Job Details (Store (Job Status) )
You can check the details of the jobs, such as the date and time the machine received and processed the jobs, their storage location, and their status.
1.
Press → [Store].
2.
Press [Job Status] → select the job whose details you want to check → press [Details].
3.
Check the detailed information → press [OK].
The display returns to the Status screen.
Cancelling a Job (Store (Job Status) )
You can cancel a Store job.
1.
Press → [Store].
2.
Press [Job Status] → select the job that you want to cancel → press [Stop].
You cannot select multiple jobs and cancel them all at once. Select and cancel one job at a time.
3.
Press [Yes].
The job is cancelled and the display returns to the Status screen.
NOTE
The cancelled job is displayed as <NG> (No Good) on the Log screen.
From the Log Screen (Store)
This section describes how to check the Store job status and to cancel a job from the Log screen of the Store job.
Checking Job Details (Store (Job Log) )
You can check the details of the jobs, such as the date and time the machine received and processed the jobs, their storage location, and their status.
1.
Press → [Store].
2.
Press [Log] → select the job whose details you want to check → press [Details].
3.
Check the detailed information → press [OK].
The display returns to the Log screen.
Printing the Log List (Store (Job Log) )
This section describes how to print the Log List.
1.
Press → [Store].
2.
Press [Log] → [Print List].
NOTE
The log can be printed only if A3, A4, or A4R (plain, recycled, thin, or colour paper) is loaded in one of the paper sources that is set to 'On' when [Other] is pressed to select a paper source in [Paper Drawer Auto Selection On/Off] in Function Settings (Settings/Registration). (See "Setting the Paper Drawer Auto Selection On/Off.") However, if [Consider Paper Type] for Copy is set to 'On' in [Paper Drawer Auto Selection On/Off] in Function Settings (Settings/Registration), you cannot print from a paper source with colour paper specified.
3.
Press [Yes].
The List is printed and the display returns to the Log screen.
Back to Top