You can specify the settings to use the machine as the client-machine for Remote Fax.
|
IMPORTANT
|
|
If you have set to use Department ID Management on a remote fax server, you can log in to a remote fax client and send faxes using a Department ID and password stored in the server.
|
For information on necessary optional equipment to use this function, see "Optional Products Required for Each Function."
You can specify the IP address or the host name for the imageRUNNER ADVANCE series (Remote Fax Server) on the server-side.
To specify the IP address, you can register the IPv4 (Internet Protocol Version 4) address and IPv6 (Internet Protocol Version 6) address.
If the TX Timeout time is set and the set time has elapsed, the remote fax job is cancelled when the Remote Fax Server is not responding.
You can set the number of lines you can select when sending remote fax. If Remote Fax Server is connected to multiple telephone lines, you can set multiple lines.
You can select the priority line. When the priority line is selected and the line is not in use, the machine sends the fax documents with the line set on [Priority TX]. When the priority line is not selected, the machine selects the line automatically.
1.
Press 
→ [Function Settings] → [Send] →[Fax Settings] → [Remote Fax TX Settings].
→ [Function Settings] → [Send] →[Fax Settings] → [Remote Fax TX Settings].Press [Remote Fax Server Address].
Enter the host name or the IP address → press [OK].
A host name is a name assigned to a host computer that provides services on the network. Enter the name for Remote Fax Server.
Press [TX Timeout].
Specify the TX timeout time by pressing [-] or [+] → press [OK].
Press [No. of Sending Lines].
Set the telephone line number to use for sending.
Press [Select Priority Line].
Select [Auto] or the line to use as a priority.