You can set the machine's printing priority. A job that belongs to a function with a higher set priority is printed after the job currently being processed is complete.
|
NOTE
|
|
Priority printing does not take place until the current job is complete. However, if the current job is paused, the printing of a job that belongs to a function with a higher set priority may start, depending on the settings.
|
1.
Press 
→ [Function Settings] → [Common] → [Print Settings] → [Print Priority].
→ [Function Settings] → [Common] → [Print Settings] → [Print Priority].2.
Select the printing priority for the various functions → press [OK].
If you select [1] for a function, that function is given the highest printing priority.
If the fax board is installed, [Receive/Fax] is displayed.
If the fax board is not installed, [Receive] is displayed.
<Other> is used for setting the priority for printing reports.
PDL prints from MEAP applications are included in <Printer>. However, local print jobs from MEAP applications are included in <Access Files>.
|
NOTE
|
|
If the same printing priority has been specified for multiple functions, printing starts with the first processed print job.
|