The Superimpose Image mode enables you to superimpose a previously scanned image which has been stored in the memory of the machine (image form) on the output.
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions (Print Function for the Files Stored in a Mail Box)."
This mode can be used only for printing a file stored in a mail box.
To use the Superimpose Image mode, the image form must be stored in the machine beforehand. (See "Image Form.")
Up to 100 image forms can be stored. However, this number varies depending on the free space of the hard disk.
The Superimpose Image mode cannot be used with files including images with resolution of less than 600 x 600 dpi.
Printing performance may not be optimal in the Superimpose Image mode, depending on the content of the file and image form.
Print modes other than the Shift mode can only be used for printed images, and not for the stored image forms.
The Form Composition mode cannot be used if the resolutions of the document and the image form are different.
You cannot select different image forms to be superimposed on the front and backsides of the print if the resolutions of the image forms are different.
|
1.
Select the desired Mail Box.
2.
Select the file that you want to print → press [Print] → [Change Print Settings] → [Options].
3.
Press [Superimpose Image].
4.
Press [Set] for the side you want to superimpose.
To superimpose a different image on both sides of a sheet, it is necessary to set the 2-Sided Printing mode.
To superimpose the same image on both sides of the sheet, specify the settings for the front side → press [Same as Front Side].
5.
Select the image form to be superimposed over the original → press [OK].
To check images stored as forms, press [Check Print] to print a sample of the image.
Select the paper size → press [Start Printing].
Press [Cancel] to cancel the check print.
6.
Press [OK].