You can check and print the following information on the Communication log: Start time, destination address, delivery result, end time, data content, and end code.
1.
Press 
→ [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Communication Log].
→ [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Communication Log].2.
Check the communication logs → press [OK].
|
NOTE
|
|
To view the detailed information of a communication log, select the log → press [Details].
|
|
NOTE
|
|
For details on the Device Information Communication Log, see Getting Started.
|
1.
Press → [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Communication Log].
→ [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Communication Log].2.
Press [Print List] → [Yes].
If you want to print the list automatically at a specified time, press [Report Settings].
<Auto Print (100 Transmissions)>
|
[On]:
|
The communication log is automatically printed when the number of send and receive transmissions reaches 100.
|
|
[Off]:
|
The communication log is not printed automatically.
|
<Specify Print Time>
If you select [On], enter the time using 
- 
(numeric keys).
- (numeric keys).Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
|
7:05 a.m.
|
→0705
|
|
11:18 p.m.
|
→2318
|
If you make a mistake when entering the time, press 
to clear your entry → enter another four digit number.
to clear your entry → enter another four digit number.If the number of send and receive transmissions exceed 100 before the specified Auto Print time is reached, a communication log of the most recent 100 transmissions is printed.
[Separate Report Type]:
If you want to print the delivery and reception logs separately, press [Separate Report Type].
If you want to print the delivery and reception logs together, do not press [Separate Report Type].
If you want to print the delivery and reception logs together, do not press [Separate Report Type].
|
NOTE
|
|
The lists can be printed only if A3, A4, or A4R (plain, recycled, thin, or colour paper) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in Function Settings (from the Settings/Registration screen) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with colour paper specified. (See "Setting the Paper Drawer Auto Selection On/Off.")
|