This mode enables you to specify the USB settings.
|
NOTE
|
|
Changes are only effective after you restart the machine (the main power switch is turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power."
|
Set [Use USB Device] to 'On' to connect a computer to the machine via the USB port.
1.
Press 
→ [Preferences] → [External Interface] → [USB Settings] → [Use USB Device].
→ [Preferences] → [External Interface] → [USB Settings] → [Use USB Device].2.
Select [On] or [Off] → press [OK].
Depending on the type of MEAP application that uses device such as a keyboard or card reader, you may need to set this setting to ‘On’. To check whether you need to set this setting to ‘On’, see the manual for the MEAP application you are using. Or, contact your local authorized Canon dealer.
|
IMPORTANT
|
|
If you want to use a USB keyboard, it is necessary to set [Use MEAP Driver for USB Input Device] to 'Off' in advance. For more information on USB keyboards, see "Basic Operations."
|
1.
Press → [Preferences] → [External Interface] → [USB Settings] → [Use MEAP Driver for USB Input Device].
→ [Preferences] → [External Interface] → [USB Settings] → [Use MEAP Driver for USB Input Device].2.
Select [On] or [Off] → press [OK].
Depending on the type of MEAP application that uses USB external memory device, you may need to set this setting to ‘On’. To check whether you need to set this setting to ‘On’, see the manual for the MEAP application you are using. Or, contact your local authorized Canon dealer.
1.
Press → [Preferences] → [External Interface] → [USB Settings] → [Use MEAP Driver for USB External Drive].
→ [Preferences] → [External Interface] → [USB Settings] → [Use MEAP Driver for USB External Drive].2.
Select [On] or [Off] → press [OK].