This mode enables you to scan different size originals together.
|
IMPORTANT
|
|
The Different Size Originals mode cannot be used with the Scan Size (Custom or Long Original), 2-Page Separation, Erase Original Frame, or Erase Book Frame mode.
If Scan Size setting is set to anything other than 'Auto', all of the originals are scanned in the specified size. If you want to scan the originals in their original sizes, make sure to set Scan Size to [Auto].
If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type).
Paper Size in which the width of leading edge of each page are different (e.g., A3 and A5) cannot be fed together.
If the Different Size Originals mode is set, the scanning speed may be slower than normal.
|
|
NOTE
|
|
To cancel this setting, press [Options] → [Different Size Originals] → [Cancel Settings].
|
1.
Place your originals and specify the destination → press [Options].
2.
Press [Different Size Originals].
3.
Select the type of originals → press [OK].
|
[Same Width]:
|
Press this key if you are placing originals with the same width.
|
|
[Different Width]:
|
Press this key if you are placing originals with different widths.
|