You can check detailed information of any send job, such as the destination and the date and time the job was specified.

1. Press [System Monitor].

2. Press [Send] → [Status] or [Log].

3. Select a job whose detailed information you want to check → press [Details].

• You cannot check the status of fax jobs sent with the Direct Sending or Manual Sending mode, or sent from computers via the fax driver because the statuses of those jobs are not displayed. To check their statuses, see the Send Job Status screen for Fax.

• If Erase Failed TX in TX Settings under <Common Settings> in Communications Settings (from the Additional Functions screen) is set to 'Off' when multiple destinations are selected for a send job, <Finished.> is displayed for those destinations to which the job was sent successfully, and <Error> is displayed for those destinations that had transmission errors. When multiple destinations are simultaneously specified for a send job, and you select and cancel the transmission to any one of those destinations, or the retransmission of an error job or an interrupted job is completed successfully, information on all of those simultaneously specified destinations is displayed in the log.

• If the optional Color Universal Send Kit is activated and you send documents using the Full mode to a machine that does not support the Full mode, delivery confirmation cannot be carried out. In this case, the job concerned is not considered as complete even though the actual sending of the document is successful. Such jobs are displayed as <Waiting for result...> on the Status screen until the time set for <Full Mode TX Timeout> in E-Mail/I-Fax Common Settings in Communications Settings in System Settings (from the Additional Functions screen) has lapsed. After the timeout, the job is moved to the log, and the result is shown as <-> when sending of the document to a server or other destination could not be verified.

• If you select a job with only one destination in [Status]:

• If you select a job with multiple destinations in [Status]:

• If you select a job in [Log]:

• If you select a job with only one destination in [Status]:

• Check the details.

To change the destination, press [Change Destination]. (See "Changing the Destination.")

To resend the job, press [Resend]. (See "Resending a Job.")

• If you select a job with multiple destinations in [Status]:

• Check the details.

• Press [Broadcast List].

• Check the status for each destination.

To change the destination, press [Change Destination]. (See "Changing the Destination.")

To resend the job, press [Resend]. (See "Resending a Job.")

• If you select a job in [Log]:

• Check the details.

• Back To Top