Send/Fax > Using the Main Unit to Send/Receive > Checking/Changing the Status of Send Jobs > Resending a Job
*
Resending a Job

You can resend jobs that are canceled due to transmission errors.

Remark
  • To be able to resend jobs that have been canceled due to a transmission error, you must first set Erase Failed TX in TX Settings under <Common Settings> in Communications Settings (from the Additional Functions screen) to 'Off'. (See "Automatic Document Deletion.")
  • You cannot resend fax jobs sent with the Direct Sending or Manual Sending mode, or sent from computers via the fax driver because the statuses of those jobs are not displayed.

  1. Press [System Monitor] → [Send] → [Status].
  1. Select the job that you want to resend → press [Details].

  1. Select the destination to resend the job to.
  • If there is only one destination:
  • If there are multiple destinations for the same sending method:

  • If there is only one destination:
  • Press [Resend].

  • If there are multiple destinations for the same sending method:
  • Press [Broadcast List].
  • Select the destination to resend the job to → press [Resend].
  • The job is placed in the send queue if there is another job being sent or waiting to be processed.

  • Back To Top