Setting the Memory Lock Mode - Canon imageRUNNER ADVANCE 6075/6065/6055 e-Manual

Setting the Memory Lock Mode

You can set to store the received fax documents in the Memory RX Inbox without printing them. After verifying the documents on the Memory RX Inbox screen, you can print or send them whenever necessary.

If you set Use Fax Memory Lock mode to 'On', you can turn Fax Memory Lock for documents sent to the Memory RX Inbox 'On' or 'Off' as necessary. If Fax Memory Lock mode is set to 'On', received documents are stored in the Memory RX Inbox instead of being printed. (See "Specifying the Fax/I-Fax Inbox Settings.")

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

IMPORTANT
Additional documents cannot be stored in the Memory RX Inbox under the following conditions. (These numbers may vary depending on the remaining capacity of the hard disk.) When a total of 2,000 documents have been stored in the Mail Box and the Fax/I-Fax Inbox. When a total of 8,000 pages have been stored in the Mail Box and the Fax/I-Fax Inbox.

NOTE
To receive documents in memory, you must first set [Use Fax Memory Lock] in Set Fax/I-Fax Inbox in Common Settings in Receive/Forward in Function Settings (Settings/Registration) to 'On'. (See "Specifying the Fax/I-Fax Inbox Settings.")