Attaching Characters Such As "CONFIDENTIAL" (Watermark)

» Copying » Functions Useful for Making and Managing Material » Attaching Characters Such As "CONFIDENTIAL" (Watermark)

0WR8-047

You can attach watermarks such as "CONFIDENTIAL" or "TOP SECRET" when copying. You can create new watermarks or use pre-registered watermarks.

Place the document. Placing Documents

Press <Copy> on the Main Menu. <Main Menu> Screen

Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen

Press <Watermark>.

Set the print position for the watermark.

Select printing position by pressing an arrow button or <Center>.

NOTE:

Adjusting the position finely

Press <Set Details>, specify each setting, and press <OK>.

You can finely adjust the horizontal and vertical position with <Fine Adjustment>. Press <X> for the horizontal position adjustment and <Y> for the vertical position adjustment, and enter the values to move the positions.

You can specify the positions of watermarks on the front side and back side with <Position for 2-Sided Prints> when performing 2-sided copying. For example, when the watermark on the front side is in the lower-right position, selecting <Opposite to Front Side> causes the watermark on the back side to be printed in the lower-left, and selecting <Same as Front Side> causes the watermark on the back side to also be printed in the lower-right.

Select orientation of the document placed.

As shown in the illustrations below, if the document is placed in the portrait orientation when facing you, select <Upright Image>, if placed in the landscape orientation, select <Sideways Image>.


	<Upright Image>		<Sideways Image>

Specify the print settings for the watermark.

Set the character format of the watermark.

Select the watermark to be printed from <Watermark Type>.

Creating a new watermark to print

You can create new watermarks with text you enter.

1	Select <Custom> in <Watermark Type>.
2	<Enter> Enter text and press <OK>. NOTE: You can register frequently used text for watermarks to easily recall it. Press <Register> <Register> and enter text. To use registered text, select a watermark from the list. To edit or delete registered watermarks, press <Register>, select a watermark from the list, and press <Edit> or <Delete>.
3	Press <OK>.

Press <Set Details> and specify detailed settings as necessary.

Specifying the pages to print the watermark on

Select whether to print the watermark on all of the pages or only on the first page.

1	Press <Pages to Print>.
2	Select <All Pages> or <Print on Top Page Only>.
3	Press <OK>.

Adjusting the density of the watermark

You can adjust the watermark density (transparency) so that the characters or images on the copy can be seen through the transparent watermark that is overlaid.

1	Press <Print Type>.
2	Select <Transparent> or <Overlay>. When <Transparent> is selected, you can adjust the density of the watermark by pressing <Light> or <Dark>. When <Overlay> is selected, the watermark is printed with the normal copy density. The characters or images overlapped by the watermark cannot be seen.
3	Press <OK>.

Press <OK>

<Close>.

Press

Copying starts.

NOTE
Watermarks are not printed on the cover (Adding a Cover and Back Cover) or the insert (Inserting Interleaves and Tab Paper).