0WR8-0SK
If you attach Document Insertion / Folding Unit-J1, you can make Z-Fold and C-Fold, and also add covers and insertion sheets using paper loaded in the unit. For how to load paper, see Loading Paper into the Document Insertion / Folding Unit-J1.
Paper feeding trayYou can load paper you want to use as a cover, sheet insertion, or job separator, etc.
Top coverOpen to remove jammed paper. Paper Jams in the Document Insertion / Folding Unit-J1
Front coverOpen to remove jammed paper. Paper Jams in the Document Insertion / Folding Unit-J1
Exit slotThe folded paper is output to this tray.
|
NOTE
|
|
For information on the paper types that can be loaded into the Document Insertion / Folding Unit-J1, see Specifications.
If you are loading preprinted paper to use as the cover page into the document insertion unit, you must load the paper face up.
|
1
Adjust the slide guides to fit the paper size.
2
Prepare the paper to load.
 |
|
Open the packaging for the paper and remove the paper stack.
|
 |
|
Fan the sheets several times and align the edges to facilitate feeding.
|
3
Load the paper stack face up.
4
Select the paper size, and press <Next>.
Select the same paper size that is loaded in the Document Insertion / Folding Unit-J1.
5
Select the paper type, and press <OK>.
|
NOTE
|
|
You cannot make copies or prints on paper that is loaded in the Document Insertion / Folding Unit-J1.
|
Folding types
Z-FoldYou can fold the right half of the paper into three sections.
C-FoldYou can divide the paper into three sections and fold to the inside so that it becomes a shape of C
