0WR8-0L6
You can print reports and lists to check information such as the total number of copied pages, communication results, and machine settings.
Counter Report
You can print a report to check the total number of all copied and printed pages, as well as the total number of scanned pages and faxed pages.
<Print List> <Yes>Page Count List
You can print a list to check the total number of pages* that were copied, printed, and scanned for each Department ID. To print this list, you need to log in with Administrator privileges. Logging into the Machine
<Management Settings> <User Management> <Department ID Management> <On> <Page Totals> <Print List> Select the type of list <Start Printing>|
NOTE
|
|
If you select <Large 2 Count Management> on the <Page Totals> screen, each side of scanned A3 size paper is counted as two pages, and both sides of scanned A3 size paper is counted as four pages.
If you print via a printer driver that does not support Department ID, Department ID is not displayed.
|
* In this report, the numbers are based on copied or printed sides of the page. For example, the count is 1 if you print on one side of a page, and the count is 2 if you print on both sides of the page.
When you press 
, the <Status Monitor/Cancel> screen appears, allowing you to check the usage history for each function. From this screen, you can also print the usage history for each function, such as copying, printing, or sending e-mail.
, the <Status Monitor/Cancel> screen appears, allowing you to check the usage history for each function. From this screen, you can also print the usage history for each function, such as copying, printing, or sending e-mail.|
NOTE
|
|
If "NG" is displayed in the printed list, printing, communicating, or saving scanned documents may have failed. Check the three-digit number preceded by "#" in the printed list to find the reason and solutions. When a Number Preceded by "#" (Error Code) Appears
If you press
<Management Settings> <Device Management>, and set <Restrict Access to Other User Jobs> to <On>, jobs other than those of the logged-in user are displayed as "***" and cannot be performed. If you log in with Administrator privileges, the jobs of all users are displayed. |
1
Press .
.2
Display the usage history of each function and print a list.
|
1
|
Press <Copy/Print>
<Job Log>. |
|
2
|
Select the item you want to print, and press <Print List>.
 |
|
3
|
Press <Yes>.
|
|
1
|
Press <Send> or <Receive>
<Job Log>. |
|
2
|
Select <Send> or <Receive> from the drop-down list, and press <Communic. Mgt. Report>.
 |
|
3
|
Press <Start Printing>.
|
|
NOTE
|
|
For documents sent by e-mail, the list indicates the sending results between the machine and the mail server, not between the machine and the destination.
If you select <Output Spec. No. of Transm.> in step 3, you can specify the number of log results that appear in the list.
You can specify whether or not to print the list automatically. Communication Management Report
|
|
1
|
Press <Send> or <Receive>
<Job Log>. |
|
2
|
Select <Fax> from the drop-down list, and press <Fax Activity Report>.
 |
|
3
|
Press <Start Printing>.
|
|
NOTE
|
|
If you select <Output Spec. No. of Transm.> in step 3, you can specify the number of log results that appear in the list.
You can specify whether or not to print the list automatically. Fax Activity Report
|
Storage log|
1
|
Press <Store>
<Job Log> <Print List>. |
|
2
|
Press <Yes>.
|
You can print a list of results for sending/receiving fax, e-mail, or I-fax, and results for storing items in the file server or Mail Box (machine's temporary storage space). A report is set to be printed automatically or printed only when an error occurs. However, you can change the setting to print only at a specified time or not to print at all.
|
NOTE
|
|
If "NG" is displayed in the printed list, printing, communicating, or saving scanned documents may have failed. Check the three-digit number preceded by "#" in the printed list to find the reason and solutions. When a Number Preceded by "#" (Error Code) Appears
If you press
<Management Settings> <Device Management>, and set <Restrict Access to Other User Jobs> to <On>, jobs other than those of the logged-in user are displayed as "***" and cannot be performed. If you log in with Administrator privileges, the jobs of all users are displayed. |
You can configure the machine to automatically print the report when the specified number of communication results, including sent or received faxes, e-mails, and I-faxes, as well as items saved in the file server or Mail Box (machine's temporary storage space), is reached. You can also configure the setting to print the report at a specified time.
<Function Settings> <Send> <Common Settings> <Communication Management Report> Configure the report print setting <OK>|
IMPORTANT
|
|
You cannot configure the settings for the Communication Management Report while <Display Job Log> in <Management Settings> is <Off>. In addition, if you change <Display Job Log> in <Management Settings> from <Off> to <On>, <Auto Print (100 Transmissions)> and <Specify Print Time> in the Communication Management Report automatically changes to <Off>. <Device Management>
<Display Job Log> |
|
NOTE
|
|
For documents sent by e-mail, the report indicates the sending results between the machine and the mail server, not between the machine and the destination.
You can manually print a Communication Management Report from a list in the usage history. Sending/receiving log
When setting to print a report at a specified time
If a report is set to print at a specified time, the 100 most recent results are printed, with the most recent results first. If the number of results exceeds 100, the older results are not printed.
|
You can configure the machine to automatically print the report for sending results, including sent faxes, e-mails, and I-faxes, as well as items saved in the file server or Mail Box (machine's temporary storage space). You can also configure the setting to print the report only when an error occurs. You are required to log in with Administrator privileges to print this report.
<Function Settings> <Send> <Common Settings> <TX Report> Configure the report print setting <OK>|
NOTE
|
|
Even if you set <On> in <Report with TX Image> in the report setting, the sent message is not displayed in a report when an encrypted PDF is sent.
For documents sent by e-mail, the report indicates the sending results between the machine and the mail server, not between the machine and the destination.
|
You can configure the machine to automatically print the report when the specified number of sent and received faxes is reached. You can also configure the setting to print the report at a specified time.
<Function Settings> <Send> <Fax Settings> <Fax Activity Report> Configure the report print setting <OK>|
IMPORTANT
|
|
You cannot configure the settings for the Fax Activity Report while <Display Job Log> in <Management Settings> is <Off>. In addition, if you change <Display Job Log> in <Management Settings> from <Off> to <On>, <Auto Print (40 Transmissions)> and <Specify Print Time> in the Fax Activity Report automatically changes to <Off>. <Device Management>
<Display Job Log> |
|
NOTE
|
|
You can manually print a Fax Activity Report from a list in the usage history. Fax sending/receiving log
When setting to print a report at a specified time
If a report is set to print at a specified time, the 40 most recent results are printed, with the most recent results first. If the number of results exceeds 40, the older results are not printed.
|
You can configure the machine to automatically print the report each time a fax is sent. You can also configure the setting to print the report only when an error occurs.
<Function Settings> <Send> <Fax Settings> <Fax TX Report> Configure the report print setting <OK>|
NOTE
|
|
A Multi TX Report is printed when <Fax TX Report> is set to <On> and broadcast transmission is performed.
Even if you set <Report with TX Image> to <On> in the report setting, the sent message is not displayed when you send a fax directly to the recipient's machine using Direct Sending Checking the Connection to the Recipient Before Sending (Direct Send) or Manual Sending Sending Faxes Manually (Manual Sending).
|
You can set a Fax RX Report to print automatically every time a fax is received. It is also possible to set the report to print only when an error occurs.
<Function Settings> <Receive/Forward> <Fax Settings> <Fax RX Report> Configure the report print setting <OK>You can configure the machine to automatically print the report when a received fax is saved in the Confidential Fax Inbox. You can also configure the setting so that the report is not printed.
<Function Settings> <Receive/Forward> <Fax Settings> <Confidential Fax Inbox RX Report> Configure the report print setting <OK>|
NOTE
|
|
Even though <Off> is set in this setting, if Fax RX Report is enabled, a report is printed when a fax is saved in the Confidential Fax Inbox.
|
Printer Report
You can print and check the information of a printer driver, such as the font list and status.
<Function Settings> <Printer> <Output Report> Select the printer driver Follow the on-screen instructions to select the item to be printedDevice Information Communication Log Report
You can configure the machine to automatically print the report when the specified number of results for device information distribution or reception is reached. You can also configure the setting to print the report at a specified time. You are required to log in with Administrator privileges to change the report setting.
<Management Settings> <Device Management> <Device Information Distribution Settings> <Communication Log> <Report Settings> Configure the report print setting <OK>|
NOTE
|
|
When you are logged in with Administrator privileges, you can manually print the device information communication history as a list. Press
<Management Settings> <Device Management> <Device Information Distribution Settings> <Communication Log> <Print List> <Yes>.When setting to print a report at a specified time
If a report is set to print at a specified time, the 100 most recent results are printed, with the most recent results first. If the number of results exceeds 100, the older results are not printed.
|
Information and settings registered in the machine such as registered destinations, send/receive settings, fax settings, forwarding conditions, files in a Mail Box, etc. can be printed as a list.
Address Lists
You can print a list of destinations registered in the Address Book or in one-touch buttons.
<Set Destination> <Address Lists> Select the Address Book or one-touch button to be printed <Print List> <Yes>TX/RX User Data List
You can print a list of the send/receive settings configured for <Send> and <Receive/Forward> in the setting menu.
<Function Settings> <Send> or <Receive/Forward> <Output Report> <TX/RX User Data List> <Yes>Fax User Data List
You can print a list of the fax settings configured for <Send> and <Receive/Forward> in the setting menu.
<Function Settings> <Send> or <Receive/Forward> <Output Report> <Fax User Data List> <Yes>Forwarding Settings
You can print a list of the fax/I-fax forwarding settings configured for <Receive/Forward> in the setting menu. You are required to log in with Administrator privileges to print this list.
<Function Settings> <Receive/Forward> <Common Settings> <Forwarding Settings> <Print List> <Yes>Mail Box File List
You can print a list of temporarily saved files in a Mail Box on the machine.
<Access Stored Files> on the Main Menu <Mail Box> Select the Mail Box to be printed <Print List> <Yes>
<Mail Box> Select the Mail Box to be printed <Print List> <Yes>Network Setting List
You can print a list of the settings configured for <Network> in <Preferences> in the setting menu.
<Preferences> <Network> <Output Report> <Yes>System Information list
You can print a list of information such as MEAP applications and licenses. You are required to log in with Administrator privileges to print this list.
<Management Settings> <License/Other> <MEAP Settings> <Print System Information> <Yes>Device Information Distribution Destination List
You can print a list of devices registered as information distribution destinations. You are required to log in with Administrator privileges to print this list.
<Management Settings> <Device Management> <Device Information Distribution Settings> <Register Destinations> <Print List> <Yes>LDAP Server Registration List
You can print a list of LDAP server settings registered in the machine. You are required to log in with Administrator privileges to print this list.
<Set Destination> <Register LDAP Server> <Print List> <Yes>IPSec Policy List
You can print a list of IPSec policy settings registered in the machine. You are required to log in with Administrator privileges to print this list.
<Preferences> <Network> <TCP/IP Settings> <IPSec Settings> <Print List> <Yes>