You can receive incoming documents using ECM (Error Correction Mode).
ECM is a mode which automatically corrects errors in an image while it is being received.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
|
IMPORTANT
|
|
If you want to communicate using ECM, it is necessary that ECM Reception be set in both the destination machine and this machine. This function does not operate unless ECM is set in both machines.
Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.
If there is trouble with the line, it will take more time to receive the documents.
|
1.
Press 
→ [Function Settings] → [Receive/Forward] → [Fax Settings] → [ECM RX].
→ [Function Settings] → [Receive/Forward] → [Fax Settings] → [ECM RX].2.
Select [On] or [Off] → press [OK].