You can set whether received documents are forwarded.
1.
Press 
→ [Function Settings] → [Receive/Forward] → [Common Settings] → [Forwarding Settings].
→ [Function Settings] → [Receive/Forward] → [Common Settings] → [Forwarding Settings].2.
Select the desired forwarding setting → press [Validate/Invalidate].
|
<On>:
|
The received document is forwarded to the specified destination if it matches the forwarding conditions.
|
|
<Off>:
|
The received document is not forwarded to the specified destination even if it matches the forwarding conditions.
|
To cancel forwarding, press [Validate/Invalidate] again.