You can determine whether you can select to send jobs via a server on the screen for specifying I-fax destination settings. To be able to select 'On' or 'Off' for <Send via Server> on the I-fax settings screen, set <Use Send via Server> and <Allow Not via Server> to 'On' beforehand.
1.
Press 
→ [Function Settings] → [Send] →[E-Mail/I-Fax Settings] →[Use Send via Server].
→ [Function Settings] → [Send] →[E-Mail/I-Fax Settings] →[Use Send via Server].2.
Select [On] or [Off] → press [OK].
|
[On]:
|
Enables you to set whether to use the Send via Server setting as a condition to send to I-fax addresses.
|
|
[Off]:
|
You cannot use the Send via Server setting as a condition to send to I-fax addresses.
|
|
NOTE
|
|
For I-fax, when <Use Send via Server> is set to 'Off', even if you enter the maximum data size for sending, there is no size limit on the data that is sent.
|