If you are sending to an e-mail or file server destination, you can specify the gamma value used when converting scanned RGB image data to YCbCr. By setting a gamma value corresponding to the gamma value at the receiving end, sent image data can be printed with the appropriate image quality at the receiving end.
|
NOTE
|
|
If the fax board is installed and you are sending documents by fax, this setting is disabled.
|
1.
Press 
→ [Function Settings] → [Send] →[Common Settings] →[YCbCr TX Gamma Value].
→ [Function Settings] → [Send] →[Common Settings] →[YCbCr TX Gamma Value].2.
Select the gamma value ([Gamma 1.0], [Gamma 1.4], [Gamma 1.8], or [Gamma 2.2]) → press [OK].