Retry Times is the mode which automatically resends data when the data cannot be sent. This occurs because the receiver is busy sending or receiving, or when an error occurs. This setting determines the number of retry attempts. You can set from one to five retry attempts, or select '0' to turn the Retry Times mode 'Off'.
|
NOTE
|
|
If the fax board is installed and you are sending documents by fax, this setting is disabled.
|
1.
Press 
→ [Function Settings] → [Send] →[Common Settings] →[Retry Times].
→ [Function Settings] → [Send] →[Common Settings] →[Retry Times].2.
Press [-] or [+] to set the number of Retry Times → press [OK].
If the number of retry times is set to '0', the machine will not resend the data.