You can set the compression ratio for network scanning. A high compression ratio reduces the amount of memory used for scanning the document, but results in a lower image quality. On the contrary, a low compression ratio increases the amount of memory used for scanning the document, but results in a higher image quality.
|
NOTE
|
|
For more information on the Network Scan function, see "Scanner."
|
1.
Press 
→ [Function Settings] → [Common] → [Scan Settings] → [Remote Scan Data Compression Ratio].
→ [Function Settings] → [Common] → [Scan Settings] → [Remote Scan Data Compression Ratio].2.
Select [High Ratio], [Normal], or [Low Ratio] → press [OK].
|
[High Ratio]:
|
A small amount of memory is used for scanning the document, but the images have a lower image quality.
|
|
[Normal]:
|
The amount of memory used for the document and the quality of the images are moderate. The compression ratio is between the High Ratio and Low Ratio settings.
|
|
[Low Ratio]:
|
A large amount of memory is used for the document, but the images have a higher image quality.
|