You can select the timing for raising the feeder tray when scanning originals using functions such as Scan and Store, and Copy.
|
NOTE
|
|
This mode is available only if the Duplex Color Image Reader Unit is attached.
|
1.
Press 
→ [Function Settings] → [Common] → [Scan Settings] → [Timing to Raise Feeder Tray].
→ [Function Settings] → [Common] → [Scan Settings] → [Timing to Raise Feeder Tray].2.
Select [When Start Is Pressed.] or [When Panel Is Touched] → press [OK].