If your originals have black streaks or appear dirty after scanning them through the feeder, clean the rollers of the feeder.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
|
NOTE
|
|
This mode is available only if the Duplex Color Image Reader Unit is attached.
It takes approximately 20 seconds to clean the feeder.
Feeder cleaning cannot be performed during printing.
|
1.
Press 
→ [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].
→ [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].2.
Place 10 sheets of blank paper into the feeder → press [Start].
Make sure that you fan the sheets of paper well.
Load plain A4 paper.
When cleaning is complete, try scanning again.
|
NOTE
|
|
To stop Clean Feeder while it is in progress, press [Stop].
|