This mode enables you to copy different size originals with the same widths such as A3 and A4, together as one group by setting them in the feeder.
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."
If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type).
If the Different Size Originals mode is set, the scanning speed may be slower than normal.
|
|
NOTE
|
|
When copying, if the Different Size Originals mode is used with the 1-Sided
 2-Sided mode, the copies are output as one-sided copies on paper of their respective sizes if the originals for the front and back sides of a two-sided copy are different in size. |
1.
Place your originals → press [Options] → [Different Size Originals].
2.
Select the type of originals → press [OK].
If you are placing originals with the same width, press [Same Width].
If you are placing originals with different widths, press [Different Width].
If you are placing originals with different widths, press [Different Width].