Front Cover - Canon imageRUNNER ADVANCE 6075/6065/6055 e-Manual

Front Cover

This mode enables you to set the machine to automatically add front and back covers, using a different type of paper from that used for the main document. In addition, you can decide whether the front and back covers are copied on as well.

*1 Printed Front Cover

*2 Printed Back Cover

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions." If you select the Staple mode when the Staple Finisher/Booklet Finisher is attached, you cannot staple more than 30 sheets of A3 or A4R paper, or 50 sheets of A4 paper, including sheet insertions. When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could jam, and a service repair may be needed.

IMPORTANT

For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."

If you select the Staple mode when the Staple Finisher/Booklet Finisher is attached, you cannot staple more than 30 sheets of A3 or A4R paper, or 50 sheets of A4 paper, including sheet insertions.

When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could jam, and a service repair may be needed.

NOTE
If you are copying on the front cover, back cover, or sheet insertions, these sheets are included in the count of the total number of copies made. If these sheets are left blank, however, the machine's counter does not count them as copies. If you are adding chapter pages, these sheets are included in the count of the total number of copies made. If you are feeding front cover and back cover from the Document Insertion/Folding Unit or Document Insertion Unit, you cannot copy on the front cover and back cover. If you want to set both Cover and Paper Insertion, select the same paper size.

NOTE

If you are copying on the front cover, back cover, or sheet insertions, these sheets are included in the count of the total number of copies made. If these sheets are left blank, however, the machine's counter does not count them as copies.

If you are adding chapter pages, these sheets are included in the count of the total number of copies made.

If you are feeding front cover and back cover from the Document Insertion/Folding Unit or Document Insertion Unit, you cannot copy on the front cover and back cover.

If you want to set both Cover and Paper Insertion, select the same paper size.

Place your originals → press [Options] → [Add Cover].

If you are feeding cover paper from the Document Insertion/Folding Unit or Document Insertion Unit, select the paper size after loading the paper into the Document Insertion/Folding Unit or Document Insertion Unit.

Press [Front Cover] and/or [Back Cover].

NOTE
To cancel a selected feature, press that key again.

Select whether to print on the front cover or back cover.

If you are feeding cover page from the Document Insertion/Folding Unit or Document Insertion Unit, select [Leave Blank].

NOTE
If you are using paper that already has printing on it (e.g., company logo) as your front and/or back cover, then you must select [Leave Blank]. Otherwise, the machine will print your original's first or last page on the preprinted paper.

Press [Change] → select the paper source → press [OK].

Select [Sheet Inserter] for the sheet insertion tray to feed cover page from the Document Insertion/Folding Unit or Document Insertion Unit. If you want to select the sheet inserter when a paper size/type is already set for the current or reserved job, you can press [Change Insert. Paper].

IMPORTANT
Select the same size paper for [Front Cover], [Back Cover], and [Sheets] (or [Chapter Pages]). If you try to set a different paper size for one feature, the paper sizes for the other features are automatically changed to the new paper size. However, if you are only changing the paper source with the same paper size, the settings for the other features will not change.

Press [OK].