You can use the Setting Confirmation screen to confirm, change, or cancel selected copy modes.
1.
Press [Check Settings].
2.
Check the settings.
If the desired modes are set, skip to step 4. Otherwise, press the key of the copy mode to be changed or cancelled → press [Change].
|
NOTE
|
|
A right triangle (
 ) on a copy mode setting key indicates that more setting screens are available by pressing the key. |
3.
Change or cancel the selected copy mode.
Perform the same steps used for setting the mode. Change the setting as you desire → press [OK].
Press [Cancel Settings].
4.
Press [OK].