You can recall the three most recent copy jobs and make copies using these settings.
|
IMPORTANT
|
|
The machine considers any one of the following operations a copy job:
When copy settings, such as the copy ratio, number of copies, and copy exposure, are specified and then, the control panel power switch,
 , or  is pressedIf and when the Auto Clear mode activates after copy settings are specified
If you recall copy settings stored in Favorite Settings
Therefore, if you make settings but do not press the control panel power switch, , or , and the Auto Clear mode does not activate, the settings you have made are not stored memory for recall by pressing [Previous Settings].You cannot recall the Merge Job Blocks mode.
The Standard mode is not stored in Recent Settings memory.
Identical copy settings are stored only once in Recent Settings memory.
Even if a cascade copy printer is stored in Recall mode, and the main power of this machine or the cascade copy printer is turned OFF and ON again, the stored settings change to standard Local Print settings. To use the stored cascade copy printer, confirm that the cascade copy printer is ON, update the cascade copy printer information after the specified time period you set in Startup Time Settings in Network in Preferences (from the Settings/Registration screen), and set the Recall mode. (See "Setting the Cascade Copy Communication Timeout.")
|
|
NOTE
|
|
Once stored, the last three copy jobs are kept in memory even if the power is turned OFF.
|
1.
Place your original → press [Previous Settings].
2.
Select [History 1], [History 2], or [History 3].
3.
Verify the settings → press [OK].
|
NOTE
|
|
You can change the recalled copy settings before making copies.
|