» Access Stored Files » Specifying the Position to Print
|
Specifying the Position to Print
You can specify the printing position when printing.
IMPORTANT
This mode is only available for printing files stored in the Advanced Space, Network, and Memory Media.
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions (Print Function for TIFF/JPEG Files)."
This mode can be used for printing a JPEG or TIFF file.
NOTE
As an example, the procedure to select and print a file stored in the Advanced Space is explained in this section.
1.
Select the desired Space.
2.
Display the level for the file you want to print.
3.
Select the file that you want to print → press [Print] → [Options].
4.
Press [Print Position].
5.
Select the printing position.
[Auto]:
If the printing position is specified for a JPEG or TIFF image, prints in the specified position. If the printing position is not specified, prints in the centre position.
[Always Center]:
Prints in the centre, regardless of the printing position specified for a JPEG or TIFF image.
[Always Top Left]:
Prints in the upper left, regardless of the printing position specified for a JPEG or TIFF image.
6.
Press [OK].
Back to Top