You can enlarge the print area when printing.
The printable area is enlarged to the top, bottom, left, and right edges of the paper. If the aspect ratio of the pages of the file are the same as the specified size, this enables you to print without inserting a margin.
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions (Print Function for PDF Files)" and "Unavailable Combination of Functions (Print Function for TIFF/JPEG Files)."
This mode is only available for printing files stored in the Advanced Space, Network, and Memory Media.
This mode can be used for printing a JPEG, TIFF, or PDF file.
|
|
NOTE
|
|
As an example, the procedure to select and print a file stored in the Advanced Space is explained in this section.
|
1.
Select the desired Space.
2.
Display the level for the file you want to print.
3.
Select the file that you want to print → press [Print].
4.
Press [Select Paper].
5.
Select the desired paper size and type → press [OK].
6.
Press [Options].
7.
Press [Enlarge Print Area].
