The Multimedia Reader/Writer enables you to use the external memory media. If the Multimedia Reader/Writer is attached, you can use the SD card, Memory Stick, CF card, and Microdrive.
|
IMPORTANT
|
|
The access indicator lights when a memory media is inserted. Do not touch the memory media when the access indicator is flashing. The Multimedia Reader/Writer is communicating with the data in the memory media.
Make sure that the memory media is facing the correct direction before inserting the memory media. If the memory media is inserted incorrectly, the Multimedia Reader/Writer and the memory media may be damaged.
A part of the memory media may protrude when it is inserted, but do not forcefully insert the memory media any further. Doing so may damage the Multimedia Reader/Writer and memory media.
Depending on the SD card you are using, the recognition process may take some time.
The corresponding format for the memory media is only FAT32.
It is recommended that a maximum of only one memory media is inserted to the Multimedia Reader/Writer or one USB memory is inserted to the machine.
|
|
NOTE
|
|
The Multimedia Reader/Writer can be attached to the inside of the USB Device Port.
|
|
(1)
|
Access Indicator
Lights when a memory media is inserted.
Flashes when communicating with the data in the memory media.
|
|
(2)
|
SD/MS Card Slot
Insert an SD card or Memory Stick to store files in the card or print files stored in the card from the machine. (See "Scan and Store" and "Access Stored Files.")
|
|
(3)
|
CF Card Slot
Insert a CF card to store files in the card or print files stored in the card from the machine. The CF card slot is also compatible with the Microdrive. (See "Scan and Store" and "Access Stored Files.")
|