Feeder (Duplex Color Image Reader Unit-C1) (Optional)

If a paper jam occurs in the Feeder, a screen similar to the one shown below appears on the touch panel display. Check the location of the paper jam, and follow the procedure described below, and the procedure that appears on the touch panel display, to remove the jammed paper.

Remove originals from the original supply tray.

Remove any originals from the feeder cover.

	1. Pull the lever, and open the feeder cover.
	2. Remove any jammed originals. If there is difficulty in removing jammed paper, do not try to remove it forcibly, and proceed to step 3.

Open the inner cover, holding by its tab.

Turn the green feed dial, and remove any jammed originals.

	1. Turn the green feed dial.
	2. Remove any jammed originals.

Close the inner cover and the feeder cover.

	1. Close the inner cover.
	2. Close the feeder cover.

Remove any jammed originals from the feeder.

1. Lift the feeder.

2. Remove any jammed originals.

3. Close the feeder.

CAUTION
Close the feeder gently to avoid catching your hand, as this may result in personal injury. Be aware that the light emitted from the platen glass may be very bright when closing the feeder.

Follow the instructions on the touch panel display.