» Security » Available Settings for Administrator Table
|
Available Settings for Administrator Table

If the administrator is specified, you can restrict operations by general users and allow the administrator to set the settings of each function on Settings/Registration. The settings available for operation vary according to the type of administrator. This section describes the settings in Settings/Registration that each administrator can operate.
IMPORTANT
All users can set the settings in [Adjustment/Maintenance] (Settings/Registration).
For information on the type of administrator, see "Administrator Settings."
Preferences
If the administrator is specified, the following settings in Preferences can be set only by the administrator.
:Only the administrator can change the settings.
:Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registraion
System Manager/Administrator
Network Manager
Device Manager
Paper Settings
Paper Type Management Settings
Display Settings
Store Location Display Settings
ID/User Name Display On/Off
Timer/Energy Settings
Date/Time Settings
Time Format
Network
Confirm Network Connection Set. Changes
TCP/IP Settings
IPv4 Settings
IPv6 Settings
DNS Settings
WINS Settings
LPD Print Settings
RAW Print Settings
SNTP Settings
FTP Print Settings
WSD Print Settings
Use FTP PASV Mode
IPP Print Settings
Multicast Discovery Settings
Use HTTP
Use WebDAV Server
SSL Settings
Proxy Settings
Confirm Dept. ID PIN
IPSec Settings
NetWare Settings
AppleTalk Settings
SMB Server Settings
SNMP Settings
Dedicated Port Settings
Use Spool Function
Startup Settings
Etherner Driver Settings
IEEE802.1X Settings
Firewall Settings
IPv4 Address Filter
IPv6 Address Filter
MAC Address Filter
IP Address Block Log
External Interface
USB Settings
Function Settings
If the administrator is specified, the following settings in Function Settings can be set only by the administrator.
:Only the administrator can change the settings.
:Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registraion
System Manager/Administrator
Network Manager
Device Manager
Common
Document Scan Lock Settings
Print Settings
Copy Set Numbering Option Settings
Secure Watermark/Doc. Scan Lock Settings
Scan Settings
Auto Online
Auto Offline
Printer
Restrict Printer Jobs
PDL Selection (Plug-n-play)
Send
Common Settings
Limit New Destinations
Always Add Device Signature to Send
E-Mail/I-Fax Settings
Communications Settings
Maximum Data Size for Sending
Default Subject
Use SMTP Authentication for Each User
Specify Authentication User Dest. to Reply
Set Authorized User Destination to Sender
Allow Sending to Unregistered Destinations
Full Mode TX Timeout
Print MDN/DSN on Receipt
Use Send Via Server
Allow MDN Not Via Server
Restrict TX Destination Domain
Fax Settings
Set Line
TX Start Speed
R-Key Setting
Confirm Entered Fax Numbers
Allow Fax Driver TX
Remote Fax TX Settings
Remote Fax Settings
Receive/Forward
Common Settings
Forwarding Settings
Set Fax/I-Fax Inbox
Memory RX Inbox PIN
Use Fax Memory Lock
Use I-Fax Memory Lock
Memory Lock Start Time
Memory Lock End Time
Divided Data RX Timeout
Always send notice for RX Errors
Fax Settings
Receive Start Speed
Receive Password
Access Stored Files
Mail Box Settings
Settings for All Mail Boxes
Advanced Space Settings
Open to Public
WebDAV Server Settings
Allow to Create Personal Space
Delete All Personal Spaces
Initialize Shared Space
Prohibit Writing from External
Authentication Management
File Formats Allowed for Storing
Network Settings
Protocol for External Reference
Encrypted Print Settings
Destination Settings
If the administrator is specified, the following settings in Set Destination can be set only by the administrator.
:Only the administrator can change the settings.
:Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registraion
System Manager/Administrator
Network Manager
Device Manager
Address Book PIN
Manage Address Book Access Number
Register LDAP Server
Auto Search When Using LDAP Server
Acquire Remote Address Book
Make Remote Add. Book Open
Management Settings
If the administrator is specified, the following settings in Management Settings can be set only by the administrator.
:Only the administrator can change the settings.
:Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registraion
System Manager/Administrator
Network Manager
Device Manager
User Management
System Manager Information Settings
Dept. ID Management
Device Management
Device Information Settings
Device Information Delivery Settings
Limited Functions Mode
Certificate Settings
Display Job Status Before Authentication
Display Log
License/Other settings
Register License
MEAP Settings
Remote UI
Delete Message Board
Register/Update Software
Data Management
HDD Data Compete Deletion Settings
Initialize All Data/Settings
TPM Settings