You can set to manually deliver device information.
|
IMPORTANT
|
|
When delivering device information, the following machines will not update their information:
Machines which are processing a send job
Machines importing or exporting data via the Remote UI
The client machine which is receiving device information from another host machine will not update the address book.
The client machine which is performing a print job will not update the printer settings.
|
1.
Press 
→ [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Manual Delivery] under <Transmitting Settings>.
→ [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Manual Delivery] under <Transmitting Settings>.2.
Select which device information you want to deliver → press [Next].
|
[On]:
|
The machine delivers the selected device information.
|
|
[Off]:
|
The machine does not deliver the selected device information.
|
<Network Settings>:
Available when [On] is selected for <Settings/Registration Value>. Select [Include] to deliver the network settings, or [Exclude] to not deliver the network settings → press [OK].
3.
Select the destinations → press [Start Manual Delivery].
If you want to cancel the delivery, press [Stop].
|
NOTE
|
|
Even if you press [Stop] on the delivery in progress screen, delivery will not be cancelled for
machines to which information has already been delivered. Delivery to the next selected machine will be cancelled. |
4.
When delivery is complete, confirm the delivery results displayed in the <Status> column on the Manual Delivery screen.