You can specify the settings for whether to use the Document Scan Lock mode, operation settings for when embedded information is detected, and settings for jobs that affect the retention of embedded information.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
|
IMPORTANT
|
|
The Document Scan Lock mode does not guarantee restriction of unauthorized copying. You may not be able to restrict unauthorized copying or analyze tracking information, depending on the combination of settings and output such as a document with an image on the entire page.
Please note that Canon will not be held responsible for any damages caused by the use of the Document Scan Lock mode or the inability to use the Document Scan Lock mode.
If you convert a document with a TL code embedded to a generic file format (such as PDF and TIFF) using the "Scan and Send" or "Scan and Store" function, the embedded information is not retained. Therefore, when you print the file after it has been converted, the settings in [Document Scan Lock Operational Settings] are not reflected.
You can analyze the embedded information using the Document Scan Code Analyzer for MEAP that is supplied with the Document Scan Lock Kit. For more information, see the manual for the Document Scan Code Analyzer for MEAP.
|
1.
Press 
→ [Function Settings] → [Common] → [Document Scan Lock Operational Settings].
→ [Function Settings] → [Common] → [Document Scan Lock Operational Settings]. 2.
Specify the desired settings → press [OK].
<Use Document Scan Lock/Embedded Info.>:
|
[On]:
|
Detects the embedded Document Scan Lock information and embeds additional information.
|
|
[Off]:
|
Does not detect the embedded Document Scan Lock information or embed additional information.
|
<Use Document Scan Lock>:
|
[On]:
|
When a document with embedded information is scanned, the embedded information is detected and the scan job is cancelled automatically.
|
|
[Off]:
|
When a document with embedded information is scanned, the scan job is started even if the document is embedded with [Prohibit All] information.
|
<Multiple Embedded Information Action>:
|
[Continue Job]:
|
If information A is already embedded in the scanned document, the document is printed without embedding the additional information B.
|
|
[Cancel Job]:
|
If information is already embedded in the scanned document, the job is cancelled.
|
<Restrict Options>:
|
[On]:
|
To retain the embedded information, the use of functions that affect the TL code is restricted.
|
|
[Off]:
|
If a job that may cause the loss of TL code is attempted to the document with embedded information, that job is cancelled. For documents without embedded information, the job is carried out in the usual way.
|