All of the originals to be sent are first scanned and read into memory, then sent. This means that you do not need to stay near the machine once the originals have been scanned.
|
NOTE
|
|
The memory can hold a total of approximately 8,000 pages of sent and received documents.
|
The machine sends each page of the document to the destination as it is scanned.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
|
IMPORTANT
|
|
With the Direct Sending mode, you can send a document of two or more pages only when using the feeder. You can only send one page at a time when you place your original on the platen glass.
You can specify only one destination at a time for the Direct Sending mode.
Memory Sending is automatically set when using Delayed Send or when multiple destinations are specified.
If an error occurs or you cancel transmission in the Direct Sending mode, you can check how many pages have been sent to the destination by printing the Fax Activity Report, or on the Log screen for Fax on the Status Monitor/Cancel screen.
If you have added lines, you can select the telephone line to use for sending a facsimile.
|
1.
Press [Direct Send].
Check mark is placed when the Direct Sending mode is selected.
If the Direct Sending mode is set, it is automatically cancelled when the transmission is complete.