To print via an AppleTalk network, it is necessary to perform the following procedures.

• 1 Macintosh Network Settings

To specify AppleTalk network settings, enable AppleTalk according to the instructions in the documentation provided with your Macintosh.

• 2 Protocol Settings (See "Protocol Settings.")

Specify the protocol settings. To specify the settings, use:

• The machine's control panel

• The Remote UI (via a web browser)

• Canon utilities (NetSpot Device Installer, etc.)

• 3 Macintosh Print Settings (See "Setting Up a Computer for Printing.")

Specify the settings for each computer you use for printing.

• You can only specify the AppleTalk protocol settings if you are using the optional UFR II Printer Kit, the optional UFR II/PCL Printer Kit, or the optional PS Printer Kit.

• Depending on the machine you are using, you may have to use optional equipment to print via an AppleTalk network. For the equipment needed, see "Optional Equipment and System Requirements."

• It is recommended that the network administrator perform step 2.

• Back To Top