|
- The machine may not enter the Sleep mode completely depending on certain conditions. (For more information, see "Additional Functions.")
- Turn the control panel power switch OFF when not using the machine for a prolonged period of time, for example, at night.
- If a Macintosh, which has been shut down, is connected to the machine via a USB cable, when you turn the machine ON, the Macintosh may also turn ON. In this case, disconnect the Macintosh from the machine. (You may also be able to solve this problem by using a USB hub between the machine and the Macintosh).
|
|
|
|
- The time it takes for the machine to automatically enter the Sleep mode can be set from 10 seconds to
4 hours. The default setting is '1' minute. (See "Additional Functions.")
- If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the touch panel to be displayed after pressing the control panel power switch.
|
|