If the Card Reader-C1 is attached to the machine, you must insert a control card to operate it. The Card Reader-C1 performs Department ID Management by using the control card.

• If you are using a login service other than default authentication, the Limit Functions mode will not be available.

• If 'Domain Authentication' or 'Domain Authentication + Local Device Authentication' of SSO-H is set as the login service, you cannot use the optional Card Reader-C1.

• If the Basic Features screen does not appear on the touch panel display when the control card is inserted, make sure that:

• The control card is inserted in the correct direction.

• The control card is inserted as far as it can go.

• An unusable control card is not inserted. (For example, cards, which are damaged or cards prohibited from use.)

• Insert a usable control card correctly.

• For instructions on turning the power ON, see "Before You Start Using This Machine."

• If the Card Reader-C1 is attached, the types of cards shown below can be used. An optical type card can manage up to 200 departments, and a magnetic type card can manage up to 1,000 departments.
  

• Back To Top