| 1 |
Platen Cover Type M
The Platen Cover Type M secures the originals placed on the platen glass.
For the iR3245/iR3235, this option is not available in some regions. |
2 |
Feeder (DADF-U1)
Originals placed in the feeder are automatically fed sheet by sheet onto the platen glass for scanning. The feeder also automatically turns over two-sided originals to make one or two-sided copies. For the iR3245/iR3235, the Feeder (DADF-U1) is standard-equipped in some regions. |
| 3 |
Card Reader-C1
The Card Reader-C1 enables Department ID Management to be performed automatically. |
4 |
Copy Tray-J1
The Copy Tray-J1 provides an additional paper output tray. |
| 5 |
Paper Deck-Q1
The Paper Deck-Q1 provides an additional source of paper for printing jobs.
The Paper Deck-Q1 holds up to 2,700 sheets of paper (80 g/m2). |
6 |
Cassette Feeding Unit-Y3
The Cassette Feeding Unit-Y3 provides two additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of paper (80 g/m2). |
| 7 |
Inner 2 Way Tray-D1
The Inner 2 Way Tray-D1 is equipped with the following features: Collate, Group, and Rotate. |
8 |
Envelope Feeder Attachment-C2
The Envelope Feeder Attachment-C2 can only be attached to Paper Drawer 1, and holds only envelopes. |
| 9 |
Puncher Unit-Q1/R1/S1
The Puncher Unit-Q1/R1/S1 can be attached to the optional Finisher-S1, and is equipped with the Hole Punch mode. |
10 |
Finisher-S1
The Finisher-S1 is equipped with the following modes: Collate, Group, Offset, and Staple (Corner). |
| 11 |
Additional Finisher Tray-B1
The Additional Finisher Tray-B1 can be attached to the optional Finisher-S1 to provide an additional paper output tray. |
12 |
Buffer Pass Unit-E2
The Buffer Pass Unit-E2 is required to attach the Finisher-AE1 or Saddle Finisher-AE2 to the main unit. |
| 13 |
Puncher Unit-L1/M1/N1
The Puncher Unit-L1/M1/N1 can be attached to the optional Finisher-AE1 or Saddle Finisher-AE2, and is equipped with the Hole Punch mode. |
14 |
Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached to the optional Saddle Finisher-AE2 for saddle stitching. |
| 15 |
Staple-J1
The Staple-J1 can be attached to the optional finisher for stapling (Corner and Double). |
16 |
Saddle Finisher-AE2
The Saddle Finisher-AE2 is equipped with the following modes: Collate, Group, Offset, and Staple (Corner, Double, and Saddle Stitch). |
| 17 |
Finisher-AE1
The Finisher-AE1 is equipped with the following modes: Collate, Group, Offset, and Staple (Corner and Double). |
 |
|
