Additional Functions > Specifying Common Settings > Identifying the Type of Paper in a Paper Source
*
Identifying the Type of Paper in a Paper Source

This setting enables you to specify the paper type loaded in each paper source.

Remark
  • Be sure to correctly set the paper type. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.

  1. Press (Additional Functions) → [Common Settings] → [Register Paper Type].
  1. Select the paper source in which you want to register the paper type.

The numbers on the screen represent the following paper sources:


The optional Cassette Feeding Unit-Y3 and Paper Deck-Q1 are attached.
  1. Select the desired paper type loaded in the paper source → press [OK].

Make sure that the registered paper type setting is the same paper type that is loaded in the paper source.

  • For more information on paper types, see "Basic Operations."
  • You can register a paper type that is not listed in [Detailed Settings] in the Stack Bypass Settings: Selecting the Paper Type screen. For details on registering paper types, see "Security."
  • The registered paper type information is displayed through the use of icons on the paper selection screen, as shown below.

  • Back To Top