|
      0WR8-0FE
      <Maintenance>
      This section describes how to use the auto cleaning function for the main unit and feeder.
      Item
      Description
      <Clean Feeder>
      If your documents have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder cleaning. Roller Inside the Feeder
      NOTE:
      Feeder Cleaning cannot be performed during printing.
      To cancel feeder cleaning while it is in progress, press <Cancel>.
      DeviceAdmin: Yes
      NetworkAdmin: Yes
      Can be set in the Remote UI: No
      Device Information Distribution Available: No
      <Clean Wire>
      If streaks appear on printouts, perform an automatic wire cleaning as necessary.
      NOTE:
      Wire cleaning cannot be performed during printing.
      DeviceAdmin: Yes
      NetworkAdmin: Yes
      Can be set in the Remote UI: No
      Device Information Distribution Available: No
      <Clean Drum>
      Printed images may be light or distorted when the machine is used immediately after installation or is not used for a long period of time. If printed images are light or distorted, perform an automatic drum cleaning as necessary.
      NOTE:
      Drum cleaning cannot be performed during printing.
      DeviceAdmin: Yes
      NetworkAdmin: Yes
      Can be set in the Remote UI: No
      Device Information Distribution Available: No
      <Original Scanning Area Cleaning Method>
      Start the video that shows how to clean the platen glass.
      DeviceAdmin: Yes
      NetworkAdmin: Yes
      Can be set in the Remote UI: No
      Device Information Distribution Available: No